A range of iPad mounts covers the need to mount iPads in a carry case, iPads without a carry case or mounted to provide the extra protection of a rugged case.
Product code: MH-90620
The Modhose mount is made of loc-line industrial tubing and uses spring clamps to secure the mount and device to furniture, stroller or wheelchair. It can be removed or repositioned quickly and easily. The adjustable cradle suits iPad 1, 2, 3 or 4. (Does not suit iPad Air or mini). This cradle is used by stretching the spring loaded arms so that the "claws" secure the iPad in the cradle. (While stocks last) [replaced by Modhose tabX]
The Modhose mount is made of loc-line industrial tubing and uses spring clamps to secure the mount and device to furniture, stroller or wheelchair. It can be removed or repositioned quickly and easily. The adjustable cradle suits iPad mini, Air, Air 2 and 1, 2, 3 or 4. This cradle is used by unscrewing the knobs at the rear to loosen the expanding V-shaped sliding section to lodge the edge of the tablet in the lip of the V bracket. Suits tablets measuring diagonally up to 14.25" (362 mm) and .375" (9.5mm) thick.
The ModHose tabX™ iPad / Tablet Holder Kit is a flexible solution for holding up a tablet where you need it. The adjustable single arm configuration allows the tablet to be positioned virtually anywhere. The adjustable tablet holder works with Apple iPad and other tablets measuring diagonally up to 361.95mm (14.25"). Works in both landscape and portrait mode. Designed for tablets weighing 0.91 kg (2 lbs) or less.
Each holder kit comes with:
- 35.56 cm (14") Adjustable Arm.
- tabX Adjustable tablet holder
- Spring clamp that open up to 5 cm (2") for desks, tables, treadmills, beds, wheelchairs, and much more.
- Fully assembled and ready to use.
Works with Apple iPad, Microsoft Surface, Samsung Galaxy, Amazon Kindle, Sony Xperia, and tablets from Dell, Barnes & Noble, Lenovo, Asus, and more!
Weight: 0.52 kg (1.14 lb)
ABLENET iPad Air in case or sleeve: Friction Knob Universal Mounting System Product Code: 70000088-RAM-HOL-TAB20U
The Universal Mounting System - friction knob mount - is designed to accommodate the ipad in its protective case. The images below show an iPad in a light duty mainstream case in situ. Extend the spring-loaded end cup is required to hold the iPad in the mount plate. The mount bracket locks into position when the central friction knob is tightened. The super-clamp connects the mount to furniture or tubing. The ABLENET Universal Mounting System (UMS) friction mount for iPad uses a heavy duty Italian articulated arm and superclamp, with an adjustable cradle.
This mount suits iPad 1, 2, 3, 4 when in cases. It is not suited to an iPad without a case. Other types of tablets will also fit this adjustable cradle.
The weight of the articulated arms is 1.3 kgs
The cradle shown below is designed for iPad Air, 2, 3 or 4 - the design is spring loaded, quick release cradle. It fits a device with the following dimensions (in inches) Height: (228mm) 9" minimum to (279 mm) 11" maximum Width: Maximum to (188.5mm) 7.43" Edge Depth: Maximum to (22 MM) 0.87"
Available as CRADLE only with mounting kit (to connect to existing Ablenet Universal switch mount). Part CODE: 70000074
Product code in price list: 70000088-RAM-HOL-TAB20U
Product Code: 70000077
The ABLENET Universal Switch Mounting System (USMS) lever mount for iPad uses a heavy duty Italian articulated arm and superclamp, with the Ablenet adjustable cradle.
The entire mount is locked into position when the lever is rotated to the locked position.
The weight of the articulated arms is 1.4 kgs
Product Code: 70000022
This mount suits iPad 1, 2, 3 and 4. To accommodate the iPads 2, 3 and 4 rubber bumpers are used to space out the cradle to secure the iPad without a carry case.
Uses superclamp and heavy duty Italian articulated arms. This mount is being phased out as the insreasing number of models of iPad require different size mount cradles. Please know which iPad model you have when choosing this mount.
|Part Code||Part Name / Description||Price||GST|
Modhose tabX Two Arm iPad and Tablet holder
Modhose tabX Two Arm iPad and Tablet holder
Modhose Single arm tabX iPad/tablet mount
Modhose single arm, tabX, spring clamp mount,
Ablenet iPad friction mount (adjustable cradle)
iPad (1, 2, 3, 4) with case (not supplied) Adjustable iPad Cradle and friction mount with super clamp.
Ablenet Universal Mounting System - for ipad (Ablenet friction mount for iPad Air)
Ablenet Universal Mounting System - for ipad (Ablenet friction mount for iPad Air) RAM holder.Not adjustable. Please advise which iPad model you have with order.
Ablenet Universal LEVER Mounting System - for ipad (Ablenet friction mount for iPad 1, 2, 3, 4)
Ablenet Universal Mounting LEVER System - for ipad (Ablenet friction mount for iPad 1, 2, 3, 4) adjustable cradle
Ablenet iPad HOVER mount with adjustable cradle
Ablenet iPad hover mount with adjustable cradle for iPad 1, 2, 3, 4 (needs iPad case - not supplied) SPECIAL ORDER
Ablenet UMS - for ipad (friction mount for iPad Air in case or sleeve)
Ablenet Universal Mounting System - for ipad (Ablenet friction mount for iPad Air) spring loaded, quick release cradle. (special order)
Rugged iPad Case with Universal Friction Mount
Rugged iPad Case with Universal Friction Mount, supplied with super clamp. Suitable for iPad 4, 3, 2. Also available for iPad Air.
|Please enquire if other configurations are required. There are many more options.|
Modhose iPad mount adapter only
ModHose iPad / Tablet holder with integrated Loc-Line mounting piece. upgrade or replace previous versions to fit iPad 1 through to 4.
Modhose tabX™ Tablet Holder only
Modhose tabX™ Tablet Holder only - replacement part (for tablets 362 mm diagonal and 9.5mm max width).
V-tabs - extra deep (for tabX holder only) (per pair) For tablets or tablets in cases, up to 19mm in width.
Adjustable iPad Cradle with Universal Mounting Plate
Adjustable iPad Cradle with Universal Mounting Plate (fit to existing Ablenet universal Switch mount, or similar Manfrotto arm) (Postage included)