Quick release mount plate for SL50 LightWRITER

The quick release mount plate for the SL50 is designed to be combined with wheelchair, table or floor mounting systems.  This is the component that secures the SL50 LightWRITER to the mount.  The SL50 LightWRITER's strap brackets fit into this mount plate.  The spring loaded handles at each side permit easy attachment and removal of the LightWRITER from the mount plate. 

The mount plate is compatible with different commercial mounting systems including:

• Toby Churchill Ltd mounting system
• REHAdapt mounting systems
• Daessy Mounting systems
• VESA mounts (this is the Video Electronics Standard Association's display mounting interface standard (commonly used for computer monitors), usually consisting of 4 screw mounts arranged in a square with horizontal and vertical distance between the screw centres being 100mm and 75mm.  Screws used are typically 4M thread and 10mm deep.  This mount plate accommodates both the 75mm and 100mm configurations.

NOTE:  This mount plate requires the LightWRITER SL50 strap brackets to be fitted.  In Australia the strap brackets are supplied fitted as standard with all LightWRITERs.

Quick Release

The quick release is achieved by pulling the release handle at either end of the mountplate.  The handle is spring-loaded and pins at each end are inserted into the base brackets on the LIghtWRITER.  Pulling the handle releases these pins.

To connect to the Daessy system an additional connector is required, and can be supplied by Zyteq.

When the LightWRITER is removed from this mount plate to be used on a table or lap or other position, it will sit flat as the mount plate and connector remains on the wheelchair.

Instructions (PDF download)